您好：歡迎來到山東嘉瑞杰機械科技有限公司網站！收藏本站

公司新聞

當前位置：

新聞資訊 > 公司新聞

公司新聞

常見問題

公司新聞

行業動態

產品

聯系嘉瑞杰

山東嘉瑞杰機械科技有限公司
聯系人：王經理
電話：0531-88670722
手機 : 15866677695

http://m.n2yn5s.cn

地址：濟南市天橋區梓東大道鑫茂科技城143號樓102室

手板對于現代加工行業來說有重要的作用

來源：http://m.n2yn5s.cn作者：山東嘉瑞杰機械科技有限公司發布時間：2019-07-25

用來檢驗產品的外觀設計是否合格。當設計師將自身企業文化和文化融入進設計時，那么產品的外觀是非常重要的一環。手板模型就可以在批量生產前很好的來驗證以后批量制造的產品外觀。

is used to test whether the design of the product is qualified. When designers integrate their own enterprise culture and brand culture into the design, the appearance of the product is a very important part of the design. The hand model can be good before mass production to verify the appearance of the products made in mass production.

1.手板模型的加工制造在現代加工業來說已經是相當廣泛，對于還不知道是什么是手板模型的朋友，可以去看看什么是手板.手板對于現代加工制造行業來說是一種非常重要的角色。

The manufacturing of hand model is quite extensive in modern processing industry. For a friend who still doesn't know what a hand model is, he can see what is a hand plate. The hand plate is a very important role for modern manufacturing industry.

2.用來檢驗結構設計是否合理。很多產品在生產之前，是需要進行各樣零部件手板加工的，也就是說，很多都是拼接裝配成為*終的產品模型。于是乎，先將手板模型制作加工出來，然后再進行組裝，看各個裝配是否合格，間隙是否達標，是否易安裝等。

青島手板

2. is used to test whether the structural design is reasonable. Many of the products need to be processed on a variety of spare parts before production, that is to say, many of them are assembled and assembled into the final product model. So, first, the hand plate model is made and processed, and then the assembly is carried out to see whether the assembly is qualified, whether the gap is up to the standard, and whether it is easy to install.

3.產品宣傳推廣。目前的產品市場可謂一日千里，每天都有新的產品面市。那么對于搶占市場來說，廠家一般都事行產品的手板模型打樣操作，然后對產品該噴油的噴油，拋光的拋光等。

3. product publicity and promotion. The current market is a thousand li a day have new products coming to market, every day. In order to seize the market, manufacturers usually pre process the product's hand plate model proofing operation, then the product's fuel injection, polishing and polishing.

4.手板可以大量省成本。這個就不多說了，以上的幾條都是在開模之前所做的。開模具不是幾百塊錢能搞定的，由于成本太高，一旦出錯，就要不斷的修改，而手板模型不一樣，打樣成本小，并且如果有問題只需要對原三維立體模型圖進行修改即可再次打樣，直到合格為止。

4. hands can save a lot of cost. This is not much to say, the above are all done before the model. Open the mold is a few hundred dollars can fix, because the cost is too high, once the error, we must continue to change, and the model is not the same, proofing cost is small, and if there is a problem only need to modify the original proof again three dimensional map, until qualified.

本文的精彩內容來自濟南手板詳細內容請點擊我們的網站:http://m.n2yn5s.cn謝謝您的到來!

The wonderful content of this article comes from the detailed content of Qingdao hand board, please click on our official website: http://m.n2yn5s.cn thank you for coming!